Top 5 Tips To Make Your Dust Collector Safer- FutureEnTech | Technology, Environment, Humanity, Lifestyle

Top 5 Tips To Make Your Dust Collector Safer

Share This
When you installed the dust collector in your office the goal was to keep your work environment, employees, and equipment safer. If you are planning to go for one, you need to remember that a price of a dust collector should never be the determining factor. 

The end goal is to maintain a safe working environment. Once installed, you need to make sure that the dust collector is safe in your work environment. Here are the top 7 tips that will help you accomplish this feat.
Top 5 Tips To Make Your Dust Collector Safer

1) Look for a collector with a higher pressure rating: 

You need to comply with the regulations in your local state when installing the dust collector. Before you decide on the size of the explosion protection equipment, you need to first consider the size of the protective equipment. 

In an event of combustible dust explosion, a heavy-duty collector that is constructed of thick gauge metal, and higher-pressure rating will be able to handle it well. 

2) Install the best ductwork:

Even if you have a properly sized explosion vent, in a rugged construction you will need to still protect the ductwork that serves the dust collector

You need to equip the ducting with valve designs and dampers to provide a minimum risk of explosions. This is usually overlooked by the drawbacks, which could mean long-term negative effects. 

Top 5 Tips To Make Your Dust Collector Safer
Dust Collector

3) Never store the dust in the hopper:

Hopper is an equipment attachment that will discharge the dust into a separate drum or storage container after it is pulled off to the filters during the cleaning process. 

It is crucial that you regularly empty this storage container, or the dust can accumulate back into the hopper. The dust that is sitting in the hopper can create a potential risk of fire or an explosion. 

4) Don’t use a PLC to clean the filter: 

For several years, PLC’s have been a popular choice for a variety of processes. They are not a proper fit for controlling the pulse cleaning of the dust collector filter cartridges. It is the case because pulse cleaning relies on a high energy and brief burst of compressed air to blow off the dirt from the filter surface. 

This needs proper pushing of air, and with PLC the valve usually opens slowly. To ensure reliability and optimize cleaning, you need to use a timber board that is specifically designed for filter pulsing. 

5) Look at the ease and safety in filter change: 

One of the first goals that you need to have ensured is a complete safety. In this regard, make sure that the worker doesn’t have to enter the dust collector to change the filters. There are several cartridge style dust collectors that offer a feature where the worker doesn’t have to enter the dust collector to change it. 

Make sure to explore ways in which filter change can be done in a safe way. It is crucial to investigate the safety and ease of filter changing, because if not then there are also chances of injuries. 

Top 5 Tips To Make Your Dust Collector Safer
Dust Collector
The above mentioned are just some of the ways in which you can make sure that your dust collector is safe. If you spend time considering your work environment and other risk factors, you will also be able to look at some other aspects which will help add more safety to your work environment. So, make sure that you go through this list and get the best results in the long term.

No comments:

Post a Comment